Nail Salon in My Hand
1
Resolve an
‘Incorrect cartridge insertion’ error
During a print job, the Status Indicator
light turns red and blinks.
#1
Turn off the Nail POP,
to put together
#2
Slowly shake the cartridge
and then remove the cartridge.
#3
Re-insert the cartridge until
hearing a ‘click’ sound.
#4
It is normal if white light turns on.
2
Resolve a ‘Paper jam’ error
During a print job, the Status Indicator light turns red and blinks.
There are two methods to resolve.
Method #1 (Power Off)
#1
Turn off the Nail POP
#2
Wait until the Nail POP is idle and silent.
#3
Turn on the Nail POP.
The jammed paper comes out.
Method #2 (Reset)
Please follow Method #2 if Method
#1 does not help to resolve.
#1
Press and hold the reset hole which is located below
the Status Indicator light using a paper clip or pin.
#2
Wait until the Nail POP is idle and silent.
#3
The jammed paper comes out.
3
How to ‘Reload Unprinted Paper’
During a print job, two papers comes out.
We can reload the unprinted paper into the cartridge.
#1
Hold and push the back hole
of the cartridge with hand
#2
Remove cover from
the home part of the cartridge.
#3
Load the unprinted paper into the cartridge.
There are two slight cuts in the paper.
These cut parts of the paper places side down
in the cartridge when loading paper.
*CAUTION
Front part of paper is printing area.
Please do not touch with oily hand.
Leftover finger print could result to have
low print quality or not to print

WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close